street scooters

Scooter Setup Guide

 

Prepare to remove scooter from the crate. Remove cardboard box. Unscrew bolts off the top of the crate.
Remove all wires. Remove the top of the crate. Remove the front wheel from the front of the crate.
Remove the axle bolt from the front fork. Remove the axle bolt from the front fork. Remove the axle bolt from the front fork.
Remove the axle bolt from the front fork. Remove wheel spacer from front fork. DO NOT LOSE. Remove wheel spacer from front fork. DO NOT LOSE.

A: Wheel spacer.
B: Speedometer cable.

Carefully remove scooter from crate. Carefully remove scooter from crate.
Remove spacer from disc brake and dispose. Remove spacer from disc brake and dispose. Place wheel spacer inside center of the wheel.
Place wheel spacer inside center of the wheel. Place front wheen in place sliding the disc into the disc brake. Place front wheen in place sliding the disc into the disc brake.
Secure the speedometer cable to the right side of the front wheel. Secure the speedometer cable to the right side of the front wheel. Secure the speedometer cable to the right side of the front wheel.
Install the axle bolt that you removed when removing the scooter from the crate. Install the axle bolt that you removed when removing the scooter from the crate. Secure the axle bolt in place.
Install front fender. Install front fender. Install front fender.
Install handle bars. Remove this bolt first. Place handle bars onto the steering column.
Place handle bars onto the steering column. Replace bolt. Install front panel.
Connect the wires. Connect the wires. Align notches and install by gently pressing into place. DO NOT FORCE.
Install screws into place. Install screws into place. Install screws into place.
Install the rack onto the back of scooter. Install the rack onto the back of scooter. Install the rack onto the back of scooter.
Install front hood. Install front hood. Snap hood into place.
Install mirrors. Install mirrors. Installing mirrors, hook wires together (Color mathced).
Installing mirrors, hook wires together (Color mathced). Install bolt, don't forget the washer. Install mirrors, secure in place.
Secure mirrors in place. Cover bolt. Install brake shields.
Install brake shields. Secure with screw. After setting up and charging the battery, Attach negative wire to the battery.
Attach negative wire to battery. Attach positive wire to battery. Place battery into compartment.
Place battery into compartment. Replace battery compartment cover. Gas tank.
To open seat, turn key. Seat will pop open on its own.